Alcatel-Lucent OmniAccess AP105
The Alcatel-Lucent OAW-AP105 wireless access point supports the IEEE 802.11n standard for high-performance WLAN. This access point uses MIMO (Multiple-in, Multiple-out) technology and other high-throughput mode techniques to deliver high-performance, 802.11n 2.4 GHz and 5 GHz functionality while simultaneously supporting existing 802.11a/b/g wireless services. The OAW-AP105 access point works only in conjunction with an Alcatel-Lucent WLAN Switch.
Use the console port to connect to a terminal for direct local management.
OAW-AP105 is equipped with a single 10/100/1000Base-T (RJ-45) auto-sensing, MDI/MDX wired-network connectivity port. This port supports IEEE 802.3af Power over Ethernet (PoE) compliance, accepting 48VDC as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE
midspan injector, or network infrastructure that supports PoE.
DC Power Socket
If PoE is not available, an optional Alcatel-Lucent AP AC-DC adapter kit (sold separately) can be used to power the OAW-AP105.
The OAW-AP105 has a single 12V DC power jack socket to support powering through an AC-to-DC power adapter.
If both POE and DC power are available, the AP uses POE even when there is not enough POE voltage available to power the AP.
- Dimensions (antenna stowed) (HxWxD):
5.2 inches x 5.3 inches x 1.8 inches
13.2 cm x 13.5 cm x 4.5 cm
- Weight: 300g/0.66 lbs.
Operating: 0ºC to 50ºC (32ºF to 122ºF)
Storage: –10ºC to 70ºC (14ºF to 158ºF)
- Relative Humidity: 5% to 95% non-condensing
- Altitude: 8,000 ft @ 28ºC (82.4ºF)
- Mounting: Wall, ceiling, or desktop mountable
- Antennas: Integrated
- Visual Status Indicators (LEDs): See Table 1
1 x 10/100/1000Base-T auto-sensing Ethernet RJ-45 Interfaces
IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)
Power over Ethernet (IEEE 802.3af compliant), 48V DC/350mA (see Table 1 for pin configuration)
12 VDC power interface, supports powering through an AC-to-DC power adapter
- Network Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11a, and IEEE 802.11n (draft)
- Antenna Type:
- Antenna Gain (Integrated Antennas):
2.4 – 2.5 GHz/2.5 dBi (max)
5.180 – 5.825 GHz/4.0 dBi (max)
- Radio Technology:
Orthogonal Frequency Division Multiplexing (OFDM)
Direct Sequence Spread Spectrum (DSSS)
- Radio Modulation Type:
802.11b - CCK, BPSK, QPSK
802.11g - CCK, BPSK, QPSK,16-QAM, 64-QAM
802.11a - BPSK, QPSK,16-QAM, 64-QAM
802.11n draft 2.0
- Media Access Control: CSMA/CA with ACK
- Supported Frequency Bands 2.4GHz:
2.400 ~ 2.4835GHz (Global), channels country specific
- Supported Frequency Bands 5GHz:
5.150 ~ 5.250GHz (low band), country-specific
5.250 ~ 5.350GHz (mid band), country-specific
5.470 ~ 5.725GHz (Europe), country-specific
5.725 ~ 5.825GHz GHz (high band), country-specific
- Data Rates:
802.11b - 1, 2, 5.5, 11 Mbps per channel
802.11g - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel
802.11a - 6, 9, 12, 18, 24, 36, 48 and 54 Mbps per channel
802.11n - Data rate MCS0 – MCS15 (from 6.5 Mbps to 300 Mbps)