CÔNG TY CỔ PHẦN DỊCH VỤ CÔNG NGHỆ DATECH
New
Mã sản phẩm: QFX5100-24Q-D-3AFI
Tình trạng: Còn hàng
Thương hiệu: JUNIPER
Tài liệu: Download tại đây
Thiết bị mạng Switch Juniper QFX5100-24Q-D-3AFI (QFX5100 24Q D 3AFI) QFX5100, 24 QSFP ports, 2 expansion slots, Layer 3, dual SFP/RJ-45 management ports, DC PSU, back-to-front airflow
Hỗ trợ kinh doanh
Ms. Lan
Mr Ánh
Ms Mỹ
Mr Liêm
Hỗ trợ kỹ thuật
Mr. Kỳ
Mr Hoàng
Mr Công
Ms.Oanh
Liên hệ nhận giá tốt
Thông số kỹ thuật
Juniper QFX5100-24Q-D-3AFI là thiết bị chuyển mạch Ethernet hiệu năng cao, được thiết kế cho các môi trường trung tâm dữ liệu hiện đại yêu cầu độ trễ thấp, băng thông lớn và khả năng mở rộng linh hoạt. Thiết bị hỗ trợ đầy đủ các tính năng Layer 2 và Layer 3 tiên tiến như VXLAN, giao thức OVSDB, BGP Add-Path, MPLS, L3VPN và IPv6 6PE, đáp ứng hiệu quả cả kiến trúc mạng truyền thống lẫn mạng định nghĩa bằng phần mềm (SDN).
Nhằm đơn giản hóa công tác vận hành và quản lý hệ thống, QFX5100-24Q-D-3AFI tích hợp công nghệ Virtual Chassis kết hợp với cơ chế High Availability (HA), cho phép mở rộng linh hoạt đồng thời đảm bảo tính sẵn sàng cao. Các cổng uplink 40GbE tốc độ cao giúp thiết bị phù hợp với các mô hình triển khai spine–leaf hoặc aggregation, mang lại giải pháp tối ưu về chi phí, hiệu suất và khả năng nâng cấp cho doanh nghiệp.

Bên cạnh đó, switch hỗ trợ nâng cấp phần mềm không gián đoạn thông qua công nghệ TISSU (Topology-Independent In-Service Software Upgrade), giúp duy trì hoạt động liên tục của mạng. Với khả năng hoạt động như Layer 2 gateway giữa các máy chủ vật lý và môi trường ảo hóa, cùng thông lượng chuyển mạch lên đến 2.56 Tbps hoặc 1.44 Bpps, Juniper QFX5100-24Q-D-3AFI là lựa chọn lý tưởng cho các trung tâm dữ liệu đòi hỏi hiệu suất cao, độ ổn định và khả năng mở rộng lâu dài.
Thông số kỹ thuật Switch Juniper QFX5100-24Q-D-3AFI
| Hardware | |
| CPU | 1.5 GHz dual-core Intel |
| RAM | 8 GB memory |
| Storage | 32 GB SSD storage |
| Switching Capacity | 2.56 Tbps/1.44 Bpps |
| Weight | 21.6 lb (9.8 kg) |
| Dimensions (HxWxD) | 1.72 x17.36 x 20.48 in (4.37 x 44.09 x 52.02 cm) |
| Switching mode | Cut-through and store-and-forward |
| Airflow | back-to-front |
| Power Consumption | 161 W |
| Interface Options | - 1GbE SFP: N/A - 10GbE SFP+: 96/104 (with breakout cable) - 40GbE QSFP+: 24/32 (with 2 x QFX-EM-4Q) - 2 management ports: 1 RJ-45 and 1 SFP |
| Rack Installation Kit | Versatile four post mounting options for 19-in server rack or datacom rack |
| Power Supply and Fan Modules | • Dual redundant (1+1) and hot-pluggable power supplies • -36 to -72 V DC power • Redundant (N+1) and hot-pluggable fan modules for back-to-front airflow |
| Performance Scale (Unidimensional) | • MAC addresses per system: 288,0003 • VLAN IDs: 4,096 • Number of link aggregation groups (LAGs): 128 • Number of ports per LAG: 32 • Number of FCoE VLANs/FC Virtual Fabrics: 4,095 • Firewall filters: 4000 • IPv4 unicast routes: 128,000 prefixes; 208,000 host routes; 644 ECMP paths • IPv4 multicast routes: 104,000 • IPv6 multicast routes: 52,000 • IPv6 unicast routes: 64,000 prefixes • ARP entries: 48,000 • Jumbo frame: 9,216 bytes • Spanning Tree Protocol (STP) - Multiple Spanning Tree Protocol (MSTP) instances: 64 - VLAN Spanning Tree Protocol (VSTP) instances: 253 • Traffic mirroring - Mirroring destination ports per switch: 4 - Maximum number of mirroring sessions: 4 - Mirroring destination VLANs per switch: 4 |
| Layer 2 Features | • STP—IEEE 802.1D (802.1D-2004) • Rapid Spanning Tree Protocol (RSTP) (IEEE 802.1w); MSTP (IEEE 802.1s) • Bridge protocol data unit (BPDU) protect • Loop protect • Root protect • RSTP and VSTP running concurrently • VLAN—IEEE 802.1Q VLAN trunking • Routed VLAN Interface (RVI) • Port-based VLAN • MAC address filtering • Private VLAN (PVLAN) • QinQ • VLAN Translation • Static MAC address assignment for interface • Per VLAN MAC learning (limit) • MAC learning disable • Link Aggregation and Link Aggregation Control Protocol (LACP) (IEEE 802.3ad) • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) |
| Link Aggregation | • Multi-chassis link aggregation (MC-LAG) • Redundant Trunk Group (RTG) • LAG load sharing algorithm—bridged or routed (unicast or multicast) traffic: - IP: SIP, Dynamic Internet Protocol (DIP), TCP/UDP source port, TCP/UDP destination port - Layer 2 and non-IP: MAC SA, MAC DA, Ethertype, VLAN ID, source port - FCoE packet: Source ID (SID), Destination ID (DID), Originator exchange ID (OXID), source port |
| Layer 3 Features (IPv4) | • Static routing • Routing policy • Routing protocols (RIP, OSPF, IS-IS, BGP) • Virtual Router Redundancy Protocol (VRRP) • Bidirectional Forwarding Detection (BFD) protocol • Virtual router • Dynamic Host Configuration Protocol (DHCP) relay • Proxy Address Resolution Protocol (ARP) |
| Multicast Features | • Internet Group Management Protocol (IGMP): v1, v2 , V3 • IGMP snooping: v1, v2, v3 • IGMP Filter • PIM-SM • Multicast Source Discovery Protocol (MSDP) |
| Security and Filters | • Secure interface login and password • RADIUS • TACACS+ • Ingress and egress filters: Allow and deny, port filters, VLAN filters, and routed filters, including management port filters • Filter actions: Logging, system logging, reject, mirror to an interface, counters, assign forwarding class, permit, drop, police, mark • SSH v1, v2 • Static ARP support • Storm control, port error disable, and autorecovery • Control plane denial-of-service (DoS) protection • Dynamic ARP Inspection (DAI) • Sticky MAC address • DHCP snooping |
| Quality of Service (QoS) | • L2 and L3 QoS: Classification, rewrite, queuing • Rate limiting: - Ingress policing: 1 rate 2 color, 2 rate 3 color - Egress policing: Policer, policer mark down action - Egress shaping: Per queue on each port • 12 hardware queues per port (8 unicast and 4 multicast) • Strict priority queuing (LLQ), smoothed deficit weighted round-robin (SDWRR), weighted random early detection (WRED), weighted tail drop • 802.1p remarking • Layer 2 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN • Congestion avoidance capabilities: WRED • Trust IEEE 802.1p (ingress) • Remarking of bridged packets |
| Data Center Bridging (DCB) | • Priority-based flow control (PFC)—IEEE 802.1Qbb • Enhanced Transmission Selection (ETS)—IEEE 802.1Qaz • Data Center Bridging Exchange Protocol (DCBX), DCBx FCoE, and iSCSI type, length, and value (TLVs) |
| Fibre Channel over Ethernet (FCoE) | • FCoE transit switch (FIP snooping ACL installation) • FCoE session path learning • FCoE session health monitoring • Graceful restart for FIP snooping • FC-BB-6 VN2VN snooping |
| Virtual Chassis | • 40GbE and 10GbE as Virtual Chassis port • Virtual Chassis Routing Engine (RE) election • Virtual Chassis pre-provisioning (plug and play) • Auto-LAG formation of Virtual Chassis ports • Mixed Virtual Chassis support • FCoE transit across Virtual Chassis members • QoS on Virtual Chassis ports • Local Designated Forwarding • Graceful RE switchover (GRES) • Nonstop routing (NSR) • Nonstop bridging (NSB) • Monitor distributed aggregate interface • Control plane protection for virtual RE |
| High Availability | • Topology-independent in-service software upgrade (TISSU) • Bidirectional Forwarding Detection (BFD) • Uplink failure detection (UFD) |
| MPLS | • Static label-switched paths (LSPs) • RSVP-based signaling of LSPs • LDP-based signaling of LSPs • LDP tunneling (LDP over RSVP) • MPLS class of service (CoS) • MPLS access control list (ACL)/policers • MPLS LSR support • IPv6 tunneling (6PE) (via IPv4 MPLS backbone) • MPLS Operation, Administration, and Maintenance (OAM)— LSP ping • IPv4 L3 VPN (RFC 2547, 4364) |
| Server Virtualization Management and SDN-Related Protocols | • Junos Space Virtual Control • IEEE 802.1Qbg (VEPA hairpin forwarding) • VMware NSX VXLAN L2 Gateway • VXLAN OVSDB • OpenFlow 1.3 client |
| Management and Operations | • Management and Operations • Contrail Networking • Junos Space Network Director • Role-based CLI management and access • CLI via console, telnet, or SSH • Extended ping and traceroute • Junos OS configuration rescue and rollback • Image rollback • SNMP v1/v2/v3 • Junos XML management protocol • sFlow v5 • High frequency statistics collection • Beacon LED for port and system • Automation and orchestration • Zero-touch provisioning (ZTP) • OpenStack Neutron Plug-in • Puppet • Chef • Python • Junos OS event, commit, and OP scripts |
| Traffic Mirroring | • Port-based • LAG port • VLAN-based • Filter-based • Mirror to local • Mirror to remote destinations (L2 over VLAN) |
| Standards Compliance | |
| IEEE Standard | IEEE standard, IEEE 802.1D, IEEE 802.1w, IEEE 802.1, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1ad, IEEE 802.3ad, IEEE 802.1AB, IEEE 802.3x, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3an |
| T11 Standards | INCITS T11 FC-BB-5 |
| Safety | • CAN/CSA-C22.2 No. 60950-1 (2007) Information Technology Equipment—Safety • UL 60950-1 (2nd Ed.) Information Technology Equipment— Safety • EN 60950-1 (2005) Information Technology Equipment— Safety • IEC 60950-1 (2005) Information Technology Equipment— Safety (All country deviations): CB Scheme report. • EN 60825-1 +A1+A2 (1994) Safety of Laser Products—Part 1: Equipment Classification • GR-63-Core (2006) Network Equipment, Building Systems (NEBS) Physical Protection • GR-1089-Core (2006) EMC and Electrical Safety for Network Telecommunications Equipment • SR-3580 (1995) NEBS Criteria Levels (Level 3) |
| EMC | • FCC 47CFR, Part 15 Class A (2009) USA Radiated Emissions • EN 55022 Class A (2006)+ A1 2007 European Radiated Emissions • VCCI Class A (2007) Japanese Radiated Emissions • BSMI CNS 13438 and NCC C6357 Taiwan Radiated Emissions • AS/NZS CISPR22:2009 |
| Environmental Ranges | • Operating temperature: 32° to 104° F (0° to 40° C) • Storage temperature: -40° to 158° F (-40° to 70° C) • Operating altitude: up to 2,000 (610 m) • Relative humidity operating: 5% to 90% (noncondensing) • Relative humidity non-operating: 0% to 95% (noncondensing) |
Power Supply và Fans
| JPSU-650W-DC-AFI | DC 650W PSU, back-to-front airflow for QFX5100-48S, QFX5100-48T, QFX5100- 24Q |
| QFX5100-FAN-AFI | Back-to-front Airflow Fan Module for QFX5100 |
Line Card
QFX-EM-4Q | 4 port QSFP+ expansion module for QFX5100-24Q |
EX4600-EM-8F | 8 port SFP+/SFP expansion module for EX4600 and QFX5100-24Q |
License
| QFX5100-HDNSE-LIC | QFX5100-24Q and QFX5100-96S Advanced Feature License for IS-IS, BGP, VxLAN and MPLS |
| QFX-VCF-LIC | License for Virtual Chassis Fabric |
Module quang Juniper
QFX-QSFP-DAC-1M | QSFP+ to QSFP+ Ethernet Direct Attach Copper (twinax copper cable) 1m passive |
QFX-QSFP-DAC-3M | QSFP+ to QSFP+ Ethernet Direct Attach Copper (twinax copper cable) 3m passive |
JNP-QSFP-DAC-5M | QSFP+ to QSFP+ Ethernet Direct Attach Copper (twinax copper cable) 5m passive |
QFX-QSFP-DACBO-1M | QSFP+ to SFP+ 10 Gigabit Ethernet Direct Attach Breakout Copper (twinax copper cable) 1m |
QFX-QSFP-DACBO-3M | QSFP+ to SFP+ 10 Gigabit Ethernet Direct Attach Breakout Copper (twinax copper cable) 3m |
QFX-QSFP-40G-SR4 | QSFP+ 40GBASE-SR4 40 Gigabit Optics, 850 nm for up to 150 m transmission on MMF |
QFX-QSFP-40G-ESR4 | QSFP+ 40GBASE-ESR4 40 Gigabit Optics, 300 m(400 m) with OM3(OM4) MMF |
JNP-QSFP-40G-LR4 | QSFP+ 40GBASE-LR4 40 Gigabit Optics, 1310nm for up to 10km Transmission on SMF |
JNP-QSFP-40G-LX4 | QSFP+ 40GBASE-LX4 40 Gigabit Optics, 100m(150m) with OM3(OM4) duplex MMF |
Đánh giá và nhận xét