Software | - Cisco Unified Wireless Network Software Release 8.2.111.0 or later
- Cisco IOS®XE Software Release 16.3
|
Supported wireless LAN controllers | - Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
- Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
- Cisco Mobility Express
|
802.11n version 2.0 (and related) capabilities | - 4x4 MIMO with three spatial streams
- Maximal ratio combining (MRC)
- 802.11n and 802.11a/g beamforming
- 20- and 40-MHz channels
- PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 dynamic frequency selection (DFS)
- Cyclic shift diversity (CSD) support
|
802.11ac Wave 1 capabilities | - 4x4 MIMO with three spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, and 80-MHz channels
- PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
|
802.11ac Wave 2 capabilities | - 4x4 MU-MIMO with three spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, 80, 160-MHz channels
- PHY data rates up to 5.2 Gbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
|
Integrated antenna | Flexible radio (either 2.4 GHz or 5 GHz) - 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
- 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio - 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
|
External antenna (sold separately) | - 2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
- Cisco offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios
|
Smart antenna connector | - Available on the 2802e Series access points only
- Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
- Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio
|
Interfaces | ◦ 2x100/1000BASE-T autosensing (RJ-45) - Management console port (RJ-45)
- USB 2.0 (enabled via future software)
|
Indicators | - Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
Dimensions (W x L x H) | - Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
|
Weight | Cisco Aironet 2802i Cisco Aironet 2802e |
Input power requirements | - 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)
- 802.3at power injector (AIR-PWRINJ6=)
|
Power draw | - 26W at the PSE with all features enabled except for the USB 2.0 port
- 30W at the PSE with the USB 2.0 port enabled
|
Environmental | Cisco Aironet 2802i - Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
- Operating temperature: 32° to 104°F (0° to 40°C)
- Operating humidity: 10% to 90% (noncondensing)
- Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 2802e - Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
- Operating temperature: -4° to 122°F (-20° to 50°C)
- Operating humidity: 10% to 90% (noncondensing)
- Operating altitude test: 40˚C, 9843 ft.
|
System memory | |
Warranty | Limited lifetime hardware warranty |
Đánh giá và nhận xét