MR36H-HW Cisco Meraki Wi-Fi 6 access point for smarter guest experiences

Mã sản phẩm: MR36H-HW

Tình trạng: Còn hàng

Thương hiệu: CISCO

MR36H-HW Cisco Meraki Wi-Fi 6 access point for smarter guest experiences

Hỗ trợ kinh doanh

Hỗ trợ kỹ thuật

Liên hệ nhận giá tốt

CAM KẾT BÁN HÀNG

Sản Phẩm Chính Hãng 100% Đầy Đủ CO/CQ

Giá Cạnh Tranh Rẻ Nhất Thị Trường

Giao Hàng Trên Toàn Quốc

Hỗ Trợ Kỹ Thuật Chuyên Nghiệp, Nhiệt Tình

Ưu Đãi Lớn Cho Đại Lý Và Dự Án

Chăm Sóc Khách Hàng Trước, Trong và Sau Khi Mua Hàng Tận Tâm.

Thông số kỹ thuật

Radios
  • 2.4 GHz 802.11b/g/n/ax client access radio 
  • 5 GHz 802.11a/n/ac/ax client access radio 
  • 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
  • 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
  • Concurrent operation of all four radios 
  • Supported frequency bands (country-specific restrictions apply)
  • Supported frequency bands (country-specific restrictions apply):
    • 2.412-2.484 GHz 
    • 5.150-5.250 GHz (UNII-1) 
    • 5.250-5.350 GHZ (UNII-2) 
    • 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 
    • 5.725 -5.825 GHz (UNII-3) 
Antenna
  • Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) 
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities 
  • DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 
  • 2 x 2 multiple input, multiple output (MIMO) with two spatial streams 
  • SU-MIMO, UL MU-MIMO** and DL MU-MIMO support 
  • Maximal ratio combining (MRC) & beamforming 
  • 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) 
  • Up to 1024-QAM on both 2.4 GHz & 5 GHz bands 
  • Packet aggregation 
Power
  • Power over Ethernet: 37 - 57 V (802.3at compatible)
  • Power consumption: 30W max (802.3at).  Note: actual power consumption may vary depending on the AP usage.
  • Power over Ethernet injector sold separately 

Note: Actual power consumption may vary depending on the AP usage.

Interfaces
  • 1x 10/100/1000 BASE-T Ethernet (RJ45) (Uplink on the back)
  • 1x 10/100/1000 BASE-T Ethernet (RJ45) with 802.3af Power over Ethernet output
  • 2x 10/100/1000 BASE-T Ethernet (RJ45) outputs
  • 1x Passthrough port (non-managed).
Mounting
  • All standard mounting hardware included 
  • Desktop, ceiling, and wall mount capable 
  • Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes 
  • Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security
  • Two security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head) 
  • Kensington lock hard point 
Environment
  • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) 
  • Humidity: 5 to 95% non-condensing 
  • Operating altitude: Up to 40,000 feet (12,192 meters)
Reliability
  • Mean Time Between Failure (MTBF): 257,215hrs at +25°C operating temperature
Physical Dimensions
  • 9.84” x 4.72” x 1.42” (25 cm x 12 cm x 3.6 cm), not including desk mount feet or mount plate
  • Weight: 17.35 oz (492 g)
Security
  • Integrated Layer 7 firewall with mobile device policy management 
  • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
  • Flexible guest access with device isolation 
  • VLAN tagging (802.1q) and tunneling with IPsec VPN 
  • PCI compliance reporting 
  • WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)**
  • EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
  • TKIP and AES encryption 
  • Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
  • Cisco ISE integration for Guest access and BYOD Posturing 
Quality of Service
  • Advanced Power Save (U-APSD) 
  • WMM Access Categories with DSCP and 802.1p support 
  • Layer 7 application traffic identification and shaping 
Mobility
  • PMK, OKC, & 802.11r for fast Layer 2 roaming 
  • Distributed or centralized layer 3 roaming
Analytics
  • Embedded location analytics reporting and device tracking 
  • Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators
  • 1 power/booting/firmware upgrade status 
Regulatory
  • RoHS
  • For additional country-specific regulatory information, please contact Meraki sales
Warranty
  • Lifetime hardware warranty with advanced replacement included
Ordering Information
  • MR36H-HW: Meraki MR36H Cloud Managed 802.11ax AP 

  • MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)

  • Note: Meraki access point license required.

  • Integrated three-port gigabit switch with POE passthrough
  • Three radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
  • Integrated BluetoothⓇ Low Energy radio
  • Two MU-MIMO 802.11ax Wi-Fi 6 radios
  • Up to 1.3 Gbps aggregate dual-band frame rate, 802.3af PoE compatible

Đánh giá và nhận xét