MR46-HW Cisco Meraki MR46 cloud-managed 4x4:4 802.11ax access point

Mã sản phẩm: MR46-HW

Tình trạng: Còn hàng

Thương hiệu: CISCO

MR46-HW Cisco Meraki MR46 cloud-managed 4x4:4 802.11ax access point

Hỗ trợ kinh doanh

Hỗ trợ kỹ thuật

Liên hệ nhận giá tốt

CAM KẾT BÁN HÀNG

Sản Phẩm Chính Hãng 100% Đầy Đủ CO/CQ

Giá Cạnh Tranh Rẻ Nhất Thị Trường

Giao Hàng Trên Toàn Quốc

Hỗ Trợ Kỹ Thuật Chuyên Nghiệp, Nhiệt Tình

Ưu Đãi Lớn Cho Đại Lý Và Dự Án

Chăm Sóc Khách Hàng Trước, Trong và Sau Khi Mua Hàng Tận Tâm.

Thông số kỹ thuật

Radios
  • 2.4 GHz 802.11b/g/n/ax client access radio 
  • 5 GHz 802.11a/n/ac/ax client access radio 
  • 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
  • 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support
  • Concurrent operation of all four radios 
  • Supported frequency bands (country-specific restrictions apply)
  • Supported frequency bands (country-specific restrictions apply):
    • 2.412-2.484 GHz 
    • 5.150-5.250 GHz (UNII-1) 
    • 5.250-5.350 GHZ (UNII-2) 
    • 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 
    • 5.725 -5.825 GHz (UNII-3) 
Antenna
  • Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) 
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities 
  • DL-OFDMA**, UL-OFDMA**, TWT support**, BSS coloring** 
  • 4 x 4 multiple input, multiple output (MIMO) with four spatial streams 
  • SU-MIMO, UL MU-MIMO**, and DL MU-MIMO support 
  • Maximal ratio combining (MRC) & beamforming 
  • 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) 
  • Up to 1024-QAM on both 2.4 GHz and 5 GHz bands 
  • Packet aggregation 

** Feature is automatically enabled via firmware update to MR 27+

Power
  • Power over Ethernet: 42.5 - 57 V (802.3at compliant)
  • Alternative: 12 V DC input 
  • Power consumption: 30W max (802.3at required)
  • Power over Ethernet injector and DC adapter sold separately

Note: Actual power consumption may vary depending on the AP usage.

Interfaces
  • 1x 100/1,000/2.5G BASE-T Ethernet (RJ45) 
  • 1x DC power connector (5.5 mm x 2.5 mm, center positive) 
Mounting
  • All standard mounting hardware included 
  • Desktop, ceiling, and wall mount capable 
  • Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes 
  • Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security
  • Two security screw options (included) (13.5 mm long, 2.5 mm diameter, 5 mm head) 
  • Kensington lock hard point 
  • Concealed mount plate with anti-tamper cable bay
Environment
  • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) 
  • Humidity: 5% to 95% non-condensing 
Reliability
  • Mean time between failure (MTBF): 1,406,652 hrs at +25°C operating temperature
Physical Dimensions
  • 12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.43 cm), not including desk mount feet or mount plate
  • Weight: 28.22 oz (800 g)
Security
  • Integrated layer 7 firewall with mobile device policy management 
  • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
  • Flexible guest access with device isolation 
  • VLAN tagging (802.1q) and tunneling with IPsec VPN 
  • PCI compliance reporting 
  • WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)***
  • EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
  • TKIP and AES encryption 
  • Enterprise mobility management (EMM) and Mobile device management (MDM) integration 
  • Cisco ISE integration for guest access and BYOD posturing

*   Feature can be enabled by contacting support

**  Feature supported on firmware MR 27+ and can be made available on MR 26; see the WPA3 article for more information

*** Feature will be made available via a future software update

Quality of Service
  • Advanced power save (U-APSD) 
  • WMM access categories with DSCP and 802.1p support 
  • Layer 7 application traffic identification and shaping 
Mobility
  • PMK, OKC, and 802.11r for fast layer 2 roaming 
  • Distributed or centralized layer 3 roaming
Analytics
  • Embedded location analytics reporting and device tracking 
  • Global layer 7 traffic analytics reporting per network, per device, and per application
LED Indicators
  • 1 power/booting/firmware upgrade status 
Regulatory
  • RoHS
  • For additional country-specific regulatory information, please contact Meraki sales
Warranty
  • Lifetime hardware warranty with advanced replacement included
Ordering Information
  • MR46-HW: Meraki MR46 cloud managed 802.11ax AP 
  • MA-PWR-30W-XX: Meraki AC adapter for MR series (XX = US/EU/UK/AU) 
  • MA-INJ-4-XX: Meraki gigabit 802.3at power over Ethernet injector (XX = US/EU/UK/AU)
  • MA-INJ-5-XX: Meraki multigigabit 802.3at power over Ethernet injector (XX = US/EU/UK/AU)
  • Note: Meraki access point license required
  • 4x4:4 MU-MIMO 802.11ax 
  • 3.5* Gbps dual-radio aggregate frame rate
  • 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
  • Integrated Bluetooth Low Energy beacon
  • Integrated scanning radio
  • Enhanced transmit power and receive sensitivity
  • Integrated enterprise security and guest access
  • Application-aware traffic shaping
  • Optimized for voice and video
  • Self-configuring, plug-and-play deployment
  • Sleek design blends into office environments
  • Full-time Wi-Fi location tracking via dedicated third radio

Đánh giá và nhận xét