CÔNG TY CỔ PHẦN DỊCH VỤ CÔNG NGHỆ DATECH

Số 23E4 KĐT Cầu Diễn, Tổ 7, Phú Diễn, Bắc Từ Liêm, Hà Nội


Bạn cần báo giá tốt

Hỗ trợ kinh doanh

Hỗ trợ kỹ thuật

Sản phẩm nổi bật

Sản phẩm liên quan

MR56-HW

(5/5)

Đánh giá sản phẩm

MR56-HW Cisco meraki Wi-Fi 6 with multigigabit Ethernet

Tình trạng: Còn hàng

Giá: Liên hệ

Chi tiết: Wi-Fi 6 with multigigabit Ethernet

Liên hệ nhận giá tốt

Tùy chọn

Thông số kỹ thuật

Radios
  • 2.4 GHz 802.11b/g/n/ax client access radio 
  • 5 GHz 802.11a/n/ac/ax client access radio 
  • 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
  • 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
  • Concurrent operation of all four radios 
  • Supported frequency bands (country-specific restrictions apply)
  • Supported frequency bands (country-specific restrictions apply):
    • 2.412-2.484 GHz 
    • 5.150-5.250 GHz (UNII-1) 
    • 5.250-5.350 GHZ (UNII-2) 
    • 5.470-5.600, 5.660-5.725 GHz (UNII-2e) 
    • 5.725 -5.825 GHz (UNII-3) 
Antenna
  • Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) 
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities 
  • DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 
  • 8 x 8 multiple input, multiple output (MIMO) with eight spatial streams on 5GHz
  • 4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4GHz
  • SU-MIMO, UL MU-MIMO** and DL MU-MIMO support 
  • Maximal ratio combining (MRC) & beamforming 
  • 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) 
  • Up to 1024-QAM on both 2.4 GHz & 5 GHz bands 
  • Packet aggregation 
Power
  • Power over Ethernet: 42.5 - 57 V (802.3at compliant)
  • Alternative: 12 V DC input 
  • Power consumption: 30W max (802.3at required)
  • Power over Ethernet injector and DC adapter sold separately

Note: Actual power consumption may vary depending on the AP usage.

Interfaces
  • 1x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)
  • 1x DC power connector (5.5 mm x 2.5 mm, center positive) 
Mounting
  • All standard mounting hardware included 
  • Desktop, ceiling, and wall mount capable 
  • Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes 
  • Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security
  • Two security screw options (included) (3.5 mm long and 2.5 mm diameter and 5 mm head) 
  • Kensington lock hard point 
  • Concealed mount plate with anti-tamper cable bay
Environment
  • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) 
  • Humidity: 5 to 95% non-condensing
  • Operating altitude: Up to 40,000 feet (12,192 meters)
Reliability
  • Mean Time Between Failure (MTBF): 1,315,498hrs at +25°C operating temperature
Physical Dimensions
  • 12.83” x 5.54” x 1.76” (32.6 cm x 14.079 cm x 4.47 cm), not including deskmount feet or mount plate
  • Weight: 35.27 oz (1 kg)
Security
  • Integrated Layer 7 firewall with mobile device policy management 
  • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal 
  • Flexible guest access with device isolation 
  • VLAN tagging (802.1q) and tunneling with IPsec VPN 
  • PCI compliance reporting 
  • WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
  • EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
  • TKIP and AES encryption 
  • Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration 
  • Cisco ISE integration for Guest access and BYOD Posturing 
Quality of Service
  • Advanced Power Save (U-APSD) 
  • WMM Access Categories with DSCP and 802.1p support 
  • Layer 7 application traffic identification and shaping 
Mobility
  • PMK, OKC, & 802.11r for fast Layer 2 roaming 
  • Distributed or centralized layer 3 roaming
Analytics
  • Embedded location analytics reporting and device tracking 
  • Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators
  • 1 power/booting/firmware upgrade status 
Regulatory
  • RoHS
  • For additional country-specific regulatory information, please contact Meraki sales
Warranty
  • Lifetime hardware warranty with advanced replacement included
Ordering Information
  • MR56-HW: Meraki MR56 Cloud Managed 802.11ax AP 
  • MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU) 
  • MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
  • MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
  • Note: Meraki access point license required.

** software features can be enabled via firmware updates

Tổng quan

  • 4x4:4 (2.4GHz) and 8x8:8 (5GHz)MU-MIMO 802.11ax
  • 5.9* Gbps dual-radio aggregate frame rate
  • 24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
  • Integrated Bluetooth Low Energy Beacon
  • Integrated scanning radio
  • Enhanced transmit power and receive sensitivity
  • Integrated enterprise security and guest access
  • Application-aware traffic shaping
  • Optimized for voice and video
  • Self-configuring, plug-and-play deployment
  • Sleek design blends into office environments
  • Full-time Wi-Fi location tracking via dedicated 3rd radio

Đánh giá và nhận xét