MR76-HW Cisco Meraki MR76 AP Outdoor

Radios

• 2.4 GHz 802.11b/g/n/ax client access radio
• 5 GHz 802.11a/n/ac/ax client access radio
• 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
• 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
• Max data rate 1.7 Gbit/s

Operating Bands (country-specific restrictions apply)

• 2.412-2.484 GHz
• 5.150-5.250 GHz (UNII-1)
• 5.250-5.350 GHZ (UNII-2)
• 5.470-5.600 GHz, 5.650-5.725 GHz (UNII-2e)
• 5.725-5.825 GHz (UNII-3)

802.11ax, 802.11ac Wave 2, and 802.11n Capabilities

• UL/DL OFDMA, TWT support, BSS coloring
• 2×2 multiple input, multiple output (MIMO) with 2 spatial streams
• UL/DL SU-MIMO and MU-MIMO Support
• Maximal ratio combining (MRC)
• Beamforming
• 20, 40, and 80 MHz (802.11ac), 20 and 40 MHz channels (802.11n)
• 160 MHz (80+80); 20, 40 and 80MHz channels (802.11ax), 160 MHz (80+80)
• Up to 1024 QAM on both 2.4 GHz and 5 GHz bands
• Packet aggregation
• Cyclic shift diversity (CSD) support

Power

• Power over Ethernet: 37 - 57 V (802.3af compatible)
• Power consumption: 15 W max
• Power over Ethernet injector sold separately

Mounting

• Mounts to walls and horizontal, vertical, and angled poles
• Mounting hardware included

Physical Security

• Security screw included
• Anti-tamper cable bay
• Concealed mount plate

Environment

• Operating temperature: -40°F to 131°F (-40°C to 55°C)
• IP67 environmental rating (sealed against water and dust)

Physical Dimensions

• 11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts and antennas
• Weight: 47.27 oz (1.34 kg)

Interfaces

• One 100/1000 Mbps auto-crossover Ethernet port
• Four external N-type connectors (note: antennas sold separately)
• 1 power/booting/firmware upgrade status

Security

• Integrated Layer 7 firewall with mobile device policy management
• Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
• Flexible guest access with device isolation
• PCI compliance reporting 
• WEP**, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
• EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM 
• TKIP and AES encryption
• Enterprise Mobility Management (EMM) and Mobile Device Management (MDM) integration
• Cisco ISE integration for Guest access and BYOD Posturing

Quality of Service

• Advanced Power Save (U-APSD)
• WMM Access Categories with DSCP and 802.1p support
• Layer 7 application traffic identification and shaping

Mobility

• PMK, OKC, & 802.11r for fast Layer 2 roaming
• 802.11r and 802.11k
• Distributed or centralized Layer 3 roaming

LED Indicators

• 4 signal strength
• 1 Ethernet connectivity
• 1 power/booting/firmware upgrade status

Regulatory

• RoHS

Warranty

• 1 year hardware warranty with advanced replacement included