RX1217RP Synology Expansion Unit

Mã sản phẩm: RX1217RP

Tình trạng: Còn hàng

Thương hiệu: SYNOLOGY

RX1217RP Synology Expansion Unit

Hỗ trợ kinh doanh

Ms. Lan
0971156699
Mr Ánh
0327226056
Ms Mỹ
0986671341
Mr Liêm
0934304399

Hỗ trợ kỹ thuật

Mr. Kỳ
0383791490
Mr Toàn
0335709912
Mr Hoàng
0865504891
Mr Công
02432012368

Liên hệ nhận giá tốt

Thông số kỹ thuật

RX1217RP Synology Expansion Unit

Hardware Specifications
Applied Models	Supports creating volumes across different units	21 series:RS4021xs+, RS3621xs+, RS3621RPxs, RS2821RP+, RS2421RP+, RS2421+ 19 series:RS1619xs+ 18 series:RS3618xs, RS2818RP+, RS2418RP+, RS2418+ 17 series:RS4017xs+, RS3617xs+, RS3617RPxs, RS3617xs 16 series:RS2416RP+, RS2416+ 14 series:RS3614xs+, RS3614RPxs, RS3614xs, RS2414RP+, RS2414+ 13 series:RS3413xs+ 12 series:RS3412RPxs, RS3412xs, RS2212RP+, RS2212+ 11 series:RS3411RPxs, RS3411xs, RS2211RP+, RS2211+
	Notes	To have better performance, we recommend creating storage volumes physically located within the same NAS or Expansion Unit, rather than creating volumes across your NAS and Expansion Unit. DSM version requirement: 6.0.1-7393 or later version
Storage	Drive Bays	12
	Compatible Drive Type* (See all supported drives)	3.5" SATA HDD 2.5" SATA HDD 2.5" SATA SSD
	Maximum Internal Raw Capacity	192 TB (16 TB drive x 12) (Capacity may vary by RAID types)
	Hot Swappable Drive
	RAID Management through Synology DSM
	Notes	It is strongly recommended that you only install drives listed on your device's compatibility list. Storage pool and volume creation processes may fail when using unverified drives. Synology is unable to provide technical support for devices using unsupported components.
External Ports	Expansion Port	1
Appearance	Size (Height x Width x Depth)	88 mm x 430.5 mm x 664 mm 88 mm x 430.5 mm x 692 mm (for RP model)
	Size (Height x Width x Depth) (with server ears)	88 mm x 482 mm x 696 mm 88 mm x 482 mm x 724 mm (for RP model)
	Weight	12.7 kg 13.4 kg (for RP model)
	Rack Installation Support*	4-post 19" rack (Synology Rail Kit - RKS-02)
	Notes	The rail kit is sold separately
Power	Power Recovery	Synchronized with the Synology RackStation
	Power Supply Unit / Adapter	500 W
	AC Input Power Voltage	100 V to 240 V AC
	Power Frequency	50/60 Hz, Single Phase
	Power Consumption*	68.60 W (Access) 27.45 W (HDD Hibernation) 71.3 W (Access) (for RP model) 31.2 W (HDD Hibernation) (for RP model)
	British Thermal Unit	234.23 BTU/hr (Access) 93.73 BTU/hr (HDD Hibernation) 243.52 BTU/hr (Access) (for RP model) 106.53 BTU/hr (HDD Hibernation) (for RP model)
	Redundant Power Supply (for RP model)
	Notes	Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).
Temperature	Operating Temperature	5°C to 35°C (40°F to 95°F)
	Storage Temperature	-20°C to 60°C (-5°F to 140°F)
	Relative Humidity	5% to 95% RH
Others	System Fan	80 mm x 80 mm x 3 pcs
	Easy Replacement System Fan
	Noise Level*	54.6 dB(A) 54.2 dB(A) (for RP model)
	Notes	Noise Level Testing Environment: Fully loaded with Seagate 1TB ST31000520AS hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%
Certification	FCC CE BSMI EAC RCM KC